Illush'ationof One-Piece Door Installation - Craftsman 139.53978SRT Owner's Manual

1/2 hp
Table of Contents

Advertisement

One-Piece
Door without Track
Before you begin, survey your garage area to
FINISHED CEILING
see whether any of the conditions
below apply
support
bracket
"_
to your installation.
&fastening
_'_
_
h_rdware is required.
See page 17.
Header
Wall
_
_
_Trolley
Stop Bolt
Cable
Trolley
EmergenCy
Release
Rope & Handle
leader
Reversinc
ap between floor and bottom
Sensor"
-----
Safety
of door must not exceed 1/4".
One-Piece Door with Track
Reversing Sensor
Based on your particular requirements, there are
several installation steps which might call for
materials and/or hardware not included in the carton.
• Step 1, page 13 - Look at the wall or ceiling above
the garage door. The header bracket mustbe
securely fastened to structural supports.
• Step 5, page 17 - Do you have a finished ceiling in
your garage? If so, a support bracket and
additional fastening hardware (not provided) may
be required.
• Safety reversing sensor, page 21 - Depending on
garage construction, wood blocks or extension
brackets (see Accessories page 38) may be
needed to fasten sensors to mounting locations.
• Step 10, page 22 - Floor mounting of the safety
reversing sensor will require hardware that is not
provided.
• Step 11, page 25 - Generally, a one-piece door
does not require reinforcement. If your door is
lightweight, you can refer to the information
relating to sectional doors on page 24.
• Step 11, page 25 - Depending on your door's
construction, you might need additional mounting
hardware for the door bracket.
• Do you have an access door in addition to the
garage door? If not, Model 53702 Emergency Key
Release is required. See page 38.
• The gap between the bottom of the garage
door and the floor cannot exceed 1/4%
Otherwise, the safety reverse system may not
work properly. See page 30. The floor or the door
should be repaired.
;afety
Reversing
.. Safety
across width of door
Sensor
Reversing
Sensor
Closed Position
/JJ/_
Trolley Stop Bolt
Cable
Wall" _
_ Header
i_;
B_cket
_BG
oor
Straight
Bracket
Door Arm
arage Door
_-
Chain
Rail
Emergency
Release
--
Rope &
Handle
You may find it helpful to refer back to this page
as you proceed with the installation of your
opener.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents