Fisher & Paykel DD603-88445B User Manual page 19

HOW TO ENTER OPTION ABJUSTMENT MORE
After usingthe DishDrawer®you maywant to changesomeof the
preset optionsto suit yourneeds.Thesettingsfor RinseAgent,Water
Softener,Auto Power,Endof Wash Program Beeps,ClosedDrawer
and CleanDishIndicatoroptionscanbe changed.
Prefinishedand Integrated Models
1. Press the POWER button to turnthe DishDrawe¢ _ to the Normal
Operating Mode.
2. Press and holdthe ECO and LOCK buttonsfor 5 seconds. When
the buttonshavebeen correctlypressed,onelong beepis emitted.
3. Release the LOCK and ECO buttons.
4. Usethe appropriate buttonson the controlpanelto makethe
necessary adjustments. T heseare explained below.
5. Oncethe changeshavebeenmade,pressthe POWER button to
returnto the NormalOperatingMode.
The DishDrawer_"will savethese changes automatically.
Hew te Adjust the Rinse Agent Setting
PrefinishedModels
1. Enterthe OptionAdjustmentModeas explainedpreviously. The
letters'rA" will be shown on the ElectronicDisplay.
2. Thecurrentrinseaid settingis shownon the wash program
indicatorin red lights. If four red lights are lit on the wash program
indicatorthen the rinseagentsettingis at four.
3. Press the LOCK button to increaseor decreasethe rinseagent
setting,the red lightswill scroll up to 5 andthen start from 1 again.
4. Onceyouhaveselectedthe desiredrinseagentsetting,pressthe
POWER button to returnto the NormalOperatingMode.
Electronicdisplay
._,_ ,_,_M,_L ,_ ,_..,_._, _,_ Exampleof RinseAgent setto 4.
Integrated Medals
1. Ertertie OptiorAdjustl_ent Modeas explaired previously. The
light abovetie S-[£RT/PAUSE buttor is red to indicatettis setting has
beenchosen.
2. Thecurrentri_seagert settlingis showr on t}e wash prograrr
indicatori_ red ligtts. f four red lightsare lit or tie was} prograr_
indicatortte_t tie rinseagert setti_gis at four.
3. Press tie LOCK buttor to ir creaseor decrease tie rinseagent
settirg, tie red lights will scroll up to 5 ard tier startfror 1 agair.
4. Onceyou haveselectedthe desiredrinseagentsetting,pressthe
POWER buttonto returnto the Norrral OperatingMode.
How to Adjust the Water Softener Setting
(for models DD603H and DS603H only)
PrefinishedModels
1. Enterthe OptionAdjustmentModeas explainedpreviously.
2. Press the START/PAUSE button untilthe letters'hd' appearon the
electronicdisplay.Thecurrentwater softenersettingis shown on the
wash programindicatorin red lights. If four red lights are lit then the
water softenersettingis at four.
3. Press the LOCK button to increaseor decreasethe water softener
setting. Forexample,if the water hardness is 500ppm,the numberof
lightsthat are lit shouldbe four.
4. Onceyouhaveselectedthe desiredwater softenersetting,press
the POWER button to returnto the NormalOperating Mode.
Electronicdisplay
H_v_ , _,,_._,L _,, _:._,.,_,_: _,_,_Exampleof the WaterSoftenersetto 4.
Integrated Medals
1. Enterthe OptionAdjustmentModeas explainedpreviously.
2. Press the START/PAUSE button until the light abovethe
START/PAUSE button is green,if it is not, pressthe POWER button
and startagain. Thecurrentwater softenersettingis shownon the
wash programindicatorin red lights. If four red lightsare lit, then the
water softeneris set to four.
3. Press the LOCI< b utton to increase or decrease the water softener
setting. Forexample,if the water hardness is 500ppm,thereshould
be four red lights lit.
4. Onceyou haveselectedthe desiredwater softenersetting,press
the POWER button to returnto the NormalOperatingMode.
DishDrawer