Advertisement

part number526607 N
05/2005
(page1 ot 12)
Drawer
INSTALLATION
INSTRUCTIONS
(NOTE: FOR INTEGRATED PANELPREPARATION INSTRUCTIONS REFERTO SUPPLIED SHEET)
DOUBLEDDC03 MODELS
DD603
PREFINISHED (shown left)
DD603
FLATDOOR (not shown)
DD6031 INTEGRATED (shown right)
S_NGLE#$603 MO#ELS
I}S(O;_
PI_tttINI',<Ut[}(',_h>v/l_ k.#t)
DS603
FLAFDOOROsotshown)
DS6031 INIEGRAIED (sh>wl_light)
NOTE TO THEINSTALLER
1.
Read these instructions completely and carefully.
2.
Installation of this DishDrawer® requires basic
mechanical and electrical skills.
3.
Be sure to leave these Instructions with the Customer.
4.
At the completion of the DishDrawer® installation, the
Installer must perform Final Check List as per Section 12
of these Installation Instructions.
5.
Remove all packaging materials supplied with the
DishDrawer®.
6.
This dishwasher is manufactured for indoor use only.
NOTE TO THECUSTOMER
Keep these Installation Instructions with your User Guide
for future reference, The DishDrawer® must be securely
anchored
before it is operated,
i_XWARNING!
Before installing the DishDrawer® , remove the house fuseor open
the circuit breaker. Ensure all water connectionsare turned OFF. It is
the responsibilityof the plumber and electrician to ensurethat each
installationcomplies with all CodesandRegulations.
Important!
Theseinstructionsmust be followed precisely to ensure correct
venting andoperation of the DishDrawer@. In the event of a fault
related to the incorrectinstallation, the installer will be liable for any
repairs.
Important!
The DishDrawer® MUST be installed to allow for future removal
from the enclosure if service is required.
Important!
Improper installationis not covered underthe Warranty.
Important!
If the DishDrawer® is to be relocated from one installationto
anotherit must be kept upright to avoid damagefrom water spillage.

Advertisement

Table of Contents
loading

Summary of Contents for Fisher & Paykel DS603FC-88450

  • Page 1 part number526607 N 05/2005 (page1 ot 12) Drawer INSTALLATION INSTRUCTIONS (NOTE: FOR INTEGRATED PANELPREPARATION INSTRUCTIONS REFERTO SUPPLIED SHEET) S_NGLE#$603 MO#ELS DOUBLEDDC03 MODELS DD603 PREFINISHED (shown left) I}S(O;_ PI_tttINI',<Ut[}(',_h>v/l_ k.#t) DD603 FLATDOOR (not shown) DS603 FLAFDOOROsotshown) DD6031 INTEGRATED (shown right) DS6031 INIEGRAIED (sh>wl_light) NOTE TO THEINSTALLER i_XWARNING! Before installing the DishDrawer®...
  • Page 2 DishDrawer ® ,,- BEFOREYOUSTART- DOUBLE& S/NG£E MODELS |_ft_k"]!,_lP.,P.,ill.'ll] %NGLE MODELS DOUBLEMODELS <::' Phillips 1ram !!!!!!!!!!!!!!!!I _=_'_=_'"_'"_"_";' E_ ..: .._ ... FlexibleExtrusion FlexibleExtrusion [tolllo_ Installation Tabs (2) for Sides (2) for Top(7) L}_akl l los_ Pm ction Clamp EdgeProtector (7) Washer Phillips 76mm Screws (7)
  • Page 3 DishDrawer ® ,._ DOUBLEMODELS 227/16" "227/16" 237/16" (570mm) 5/16- (570turn) _ mm/ I, WATER CONNECTION RecommendedHOT (Maximum 140°F/60°C). Suppliedhose to suit 3/8" (9ram) malecompressionfitting, WATER SOFTENER MODELS Referto your DishDrawer® User Guidefor Side View ° __2015/_,,_ how to set up your water softener. (520rnm) k-"'---- _ WATER PRESSURE...
  • Page 4 DishDrawer ® ._ DOUBLEMODELS 1_'21Oh_lXfld[efe]Ml[e]=vi,1 OPTION1 DishDrawer® and Standpipe 0 11/2" (38mm) with Air Gap, VALVE WATER SUPPLY MINIMUM BEND RADIUS FROM VALVE OPTION 2 DishDrawer® with Waste Disposal. minimum DISPOSAL WASTE WATER SUPPLY MINIMUM BEND RADIUS FROM VALVE OPTION 3 DishDrawer®...
  • Page 5 5J£6££ MOD£ZS (570_ r_ ) t8 n n!l WAYER COIIECTIOI Rcco iicrSc'd IiOl (l!laxi _ _ 140T160°0}, S pplkd Noseto s(_its/s'(9mm) m _ _o <,]>I co npress os ftsg, Side View "=_'_ WKIER SOFTEIER IIOOELS toyo_ U;;rQi£ (520_ m) Re set llll yolff vvatl,...
  • Page 6 OPTION1 S n_:pp @lV2"(38nn)wi Ar()G WASTE WASYF MINIMUM 51:ND RAVqU f::K(}M VALVE OPTION 2 Di; Daw;¢ win W_,le Di;pos_. BEND RAOIUS f RO/v! VALVE...
  • Page 7: Removing Thetub

    DishDrawer ® _ INSTALLATIONINSTRUCTIONS PLEASE NOTE. Yourmodel of DishDrawer® may differ from the model shown in the installation READTHESEINSTRUCTIONS diagrams. Installationis similar for all models for either Singleor Doublemodels, Irlom _to[_ cfclr f7 COMPLETELY A ND CAREFULLY. o S_glc _o(_s e@i s 9hlgh _- i_ b_e_ Installationdiagrams havebeen simplified to enable clearer instruction.
  • Page 8 DishDrawer ® _ INSTALLATION INSTRUCTIONS STEP 3: ADJUSTING THE FEET (DOUBLE MODELS ONLY) DOUBLE MODELS ONLY Adjust the height of the product to suit the cabinetry, by turning the feet from inside the product using a wrench or M5 socket, TIP - gently take the load off each foot...
  • Page 9: Refitting Thetub

    DishDrawer ® _ INSTALLATIONINSTRUCTIONS STEP 5: ELECTRICAL CONNECTION _WARNING! _WARNING! The product MUST NOT be If permanently connecting be plugged in at this stage, sure the power is isolated. POWER OUTLET li_Be sure there is a power outlet in reach of the supplied power cord. If there is not a suitable outlet available then have one installed by a qualified electrician, Do not use an extension cord,...
  • Page 10: Connecting The Inlet Hose

    DishDrawer ® _ INSTALLATIONINSTRUCTIONS STEP7: CONNECTINGTHEDRAIN HOSE(S) DishDrawer® with Hose Joiner (see PlumbingOptions). Remember to slip the wire clip(s) on the drain hose(s) first, Slip a wire clip over each drain hose, then push the hoses into the Drain Hose Joiner firmly, 5 clicks, Position the wire clip(s) DRAIN HOSE between the two positioning ribs on the Drain Hose Joiner.
  • Page 11 DishDrawer ® _ INSTALLATIONINSTRUCTIONS STEP 9: MEASURING THE TOEKICK (DOUBLE MODELS ONLY) open Partially the bottom drawer, Turn Prefinished Toe Kick upside down and hold vertically against the bottom edge of the Tub side (not the drawer front), Mark the position of the bottom edge of the Tub side on the Toe Kick, Choose the nearest groove to the pencil mark which will result in the shortest Toe Kick.
  • Page 12: Final Checklist

    DishDrawer ® _ INSTALLATIONINSTRUCTIONS STEP11: FITTING THETOEKICK TO THEPRODUCT(DOUBLE MODELS ONLIt) Toe kick mounting rails _"_1 Partly open bottom drawer. Position Toe Kick behind door and slide onto the mounting rails on the underside of tub, Close bottom drawer, check if flush with adjacent cabinetry, If required open drawer and adjust, Note.

Table of Contents