Slot Assignments - Nortel CALLPILOT Installation And Configuration Manual

702t server description

Slot assignments

Introduction
The slot assignment tables show the following:
„
the physical location of boards inside the server, relative to other boards
„
the order in which boards are installed (for example, board #1, 2, 3, and
so on)
„
how the boards are represented in CallPilot Manager applications (that is,
on the Maintenance Administration page)
„
the maximum capacity for each switch connectivity
Note: Your server may vary depending on what was ordered from Nortel
Networks. Therefore, your server may not have all of the slots populated.
Slot definition and slot numbering
In these tables, the term "slot" refers to the available slot openings in the
chassis, not the PCI or ISA connectors inside the server.
The slots are numbered from the bottom of the server to the top. Slot 1 is the
bottom slot in the chassis if the chassis is standing on its feet.
14
Standard 1.0
CallPilot