Craftsman 137.217100 Owner's Manual page 2

SECTION
Warranty ........................................
Product Specifications ...........................
Safety Instructions ..........
Accessories and Attachments.
Carton Contents ............
Know Your Shaper / Router .o
Assembly and Adjustments.
Operation ...............
Maintenance .............
Troubleshooting guide .....
Parts ...................
Espa_ol .................
PAGE
'MOTOR ................... 120 V, 60 HZ, 9 AMP AC
DOUBLE INSULATED ....... Yes
HORSEPOWER ............ 1.5 HP (Max. Developed)
SPINDLE
SPEED ............... 10,000 R.RM. (No Load)
DIAMETER ............ 1/2'
HEIGHT ADJUSTMENT .. 7/8 '
ROTATION ............. Reversible
CUTTER CAPACITY ......... 2"
ROUTER COLLET .......... 1/2", 1/4"
TABLE SIZE ............... 18' X 15-7/16"
TABLE INSERT ............. Reversible
FENCE ................... Yes
MITER GAUGE ............. Yes
DUST CHUTE .............. Yes
WEIGHT .................. 35.5 Ib
To avoid electrical hazards, fire hazards, or damage to
the tool, use proper circuit protection. Use a separate
electrical circuit for your tools.
Your shaper/router is wired at the factory for 120V
operation, Connect to a 120V, 15 AMP branch circuit and
use a 15 AMP time delay fuse or circuit breaker. To avoid
shock or fire, replace power cord immediately if it is worn.
cut or damaged in any way.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known [to the State of California] to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints.
• Crystalline silica from bricks,cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals:work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out micros-copic particles.