Network Installation; Connect To The Network Port - Oki ES2024 Software Installation Manual

Network Installation

Connect to the Network Port

!
No Ethernet® cable is supplied with the printer. Use an Ethernet cable with two twisted wire pairs and an
RJ45 plug.
□ Turn the printer off.
□ Connect your Ethernet cable to the network port on the print server (1).
□ Connect the other end of the cable to the network port (2).
□ Turn the printer on and wait for the print server status light (3) to stop blinking.
□ Press the Test button (4) on the print server. An OkiLAN Configuration Sheet prints.
□ This sheet contains information you need to set up the printer on your network.
PC_connect_1.tif
3