Network Installation; Windows - Oki C9600hdn Software Installation Manual

Network Installation

®

Windows

Overview
Complete these steps to install your printer on a network:
1 Install the Ferrite Core.
2 Connect the Ethernet
Interface.
3 Assign an IP address
to the printer.
4 Install the printer driver
and OKI LPR utility.
5 Install additional
network utilities.
6 Activate printer options.
1 Install the Ferrite Core
In order to reduce electromagnetic interference—"noise" that
interferes with TVs or other appliances—you must place the
enclosed ferrite core on the network cable connected to your
printer. Here is how to do it:
®
2
IMPORTANT!
This safeguard is an FCC requirement.
1. Disconnect the network cable from the printer, if necessary.
2. Loop the cable if necessary to keep the ferrite core in place.
3. Place the open core about 1 inch from the cable connector
on the printer end.
4. Press the two halves of the core together until they click
shut.