Windows Network Installation
Ethernet Connection
®
No Ethernet
cable is supplied with the printer. Use an Ethernet cable with two twisted wire pairs and an RJ45
Note:
plug.
□
Turn the printer off.
□
Remove the plug (
□
Connect the other end of the cable to the network port.
□
Turn the printer on and wait for the print server's STATUS light (
□
Press the TEST button (
sheets handy: they contain information you need to set up the printer on your network.
) from the Ethernet port (
1
) on the print server. The Network Information configuration sheets print. Keep these
4
), then connect your Ethernet cable to the port.
2
) to stop blinking.
3
2