Downloading Firmware To The Disk Array Controllers - HP Surestore Disk Array 12h - And FC60 System Administrator Manual
System administrator's guide for hp-ux, mpe, and windows nt
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- Advanced user's manual (466 pages) ,
- User manual (310 pages)
Table of Contents
Advertisement
Downloading Firmware to the Disk Array Controllers
This procedure updates the firmware on both controllers simultaneously.
CAUTION! Do not attempt to download controller firmware to a disk array that is serving
as the NT boot device. If you attempt to do so, the operating system will crash.
NOTE! Downloading firmware to the disk array controllers is done most efficiently using the
WinDownload utility described in
To download new firmware code to the disk array controllers
1.
Gather the following information:
The ID of the disk array. The disk array ID can be displayed using the arraydsp -i command.
The location and name of the file containing the new firmware code
2.
From a command prompt type in the following command:
download -C codefilename <array-id>
codefilename identifies the file containing the firmware code
Using the ARM Command Line Utilities for Windows NT
Downloading Controller Firmware
Downloading Firmware
in the preceding chapter.
261
Advertisement
Table of Contents
