HP Surestore Disk Array 12h - And FC60 System Administrator Manual page 218

Managing the HP SureStore E Disk Array 12H on Windows NT
Setting Up AutoRAID Manager for Windows NT
To select additional arrays you want to manage:
1. On the View menu, click Select Hosts
2. Select a disk array you want to manage from the Known Hosts. You can select multiple arrays at once.
3. Click the Add>> button to move the disk array to the Selected Hosts list. Click OK. All the disk arrays
you added are now displayed in the Detail pane.
There may be a delay as the status of each disk array is retrieved. Until the status is retrieved, each disk
array is assigned a status of UNKNOWN.
You are now ready to begin managing your disk arrays using the AutoRAID Manager.The next chapter
provides step-by-step instructions for performing the tasks involved in managing the disk array.
NOTE! Disk arrays connected to an NT cluster will appear twice in the Discovered Arrays -
- once for each server in the cluster.
218