Change Ring Signal For A Monitoring Key - Ericsson DIALOG 4422 User Manual

Ô
Settings
Â
Ô
ì
ì
Â
í
Ô Õ
Settings
Dialog 4422 IP Office

Change ring signal for a Monitoring key

The Monitoring keys are programmed by your system
administrator, however you can change the type of ring signal from
your phone. See also section
Change the type of ring signal
Press.
Function Keys
The
framed.
Press.
Press the Monitoring key to program.
The extension number of the phone that is monitored is shown
together with the current type of ring signal for the key.
Monitored number: 3223
Periodic
Press (+) to change.
Silence
Periodic
Press to change between the ring signals.
• Silence.
• Periodic (repetitive) ring signal.
• Delayed periodic ring signal.
• One muted ring signal. Only one ring signal with a low level.
• One muted delayed ring signal.
Note: The Clear key can be used to leave the menu without
saving the changes.
Press to store the framed ring signal.
Press to return to the previous menu,
or
press to return to idle mode.
"Key Monitoring" on page 73.
Programmable Keys
menu or the
Settings
menu is
85