Direct Access Method (Using Hostname) - HP StorageWorks NAS b2000 - v2 Quick Start Manual

Configuration Setup
Figure 9: Rapid Startup configuration review screen

Direct Access Method (Using Hostname)

The NAS b2000 v2 ships by default with DHCP enabled on the network port. If
the system is placed on a DHCP serviced network and the serial number of the
device is known, it can be accessed through a client running Microsoft Internet
Explorer 5.5 (or later) on that network, using the 3201 port of the device. The
serial number may be found behind the front bezel of the NAS b2000 v2, as
illustrated in
36
Figure 10.
NAS b2000 v2 Quick Start Guide