Before You Begin; Preinitialization - HP StorageWorks NAS b2000 - v2 Quick Start Manual

Before You Begin

This chapter describes the preinitialization and configuration tasks required for
the HP StorageWorks NAS b2000 v2.

Preinitialization

Before beginning the installation process, verify that the hardware installation is
complete. Verify that the NAS b2000 v2 is completely installed in the rack and
that all cables and cords are connected. The setup utility documented here and in
the next section only provide basic setup for the network components of the
NAS b2000 v2.
Note:
the quick reference and rack installation poster included in the shipping carton.
NAS b2000 v2 Quick Start Guide
If you need assistance with rack installation or hardware connections, refer to
2
25