Remote Browser Method (Using Hostname); Requirements - HP StorageWorks NAS 1500s Installation Manual

Remote browser method (using hostname)

The NAS 1500s ships with DHCP enabled on the network port. If
the system is placed on a DHCP enabled network and the serial
number of the device is known, it can be accessed through a client
running Internet Explorer 5.5 (or later) on that network, using the
3202 port of the device. The serial number is located below the
power source on the back of the NAS 1500s, as illustrated in
Figure
Figure 7: Serial number location

Requirements

The following items are required to run the WebUI configuration
application:
Windows-based PC loaded with Internet Explorer 5.5 (or
later) on the same segment as the NAS 1500s
DHCP-enabled network
Serial number of the NAS 1500s
NAS 1500s Installation Guide
7.
31