Adjust The Scanner; Lcd Error Messages - HP 1050 series User Manual

Adjust thescanner
Adjust the scanner
The scanner is adjusted at the factory. If, however, you drop your machine while moving
it, we recommend you adjust scanner.
1. Press Menu repeatedly until TOOLS appears and press Start/Enter.
2o Scroll to Adjust Scanne_ by pressing 4 _ and press Start/Enter.
3. Load a plain WHITE sheet of paper (no writing or graphics) into the document feeder
and press Start/Enter_
- The machine starts to scan the document to adjust the scanner_
o Printing quality may be unexpectedly worse if you do not use a plain WHITE
paper for the adjustment.
LCD error messages
These are
the error message that may display along with solutions for you.
.................... i
D;splay Stalus/_iutlon
Ad:just scanner Adiust the scannerto fix this problemas described in Adjust the
first in TOOLS menu scanner o n page 63.
Check white paper Youmustuseplain, white paperwhen adjusting the scannen
document and try See
Adius
the scanner o n page
63.
again
Clean white roller, Formoreinformation, seeClean thedocument scanner a reaon
glass and try again page 61..
Duplicated with Thesame numberhas
already
beenregistered into a nother
[Speed No.xx] speeddlal c ode°
Exceeded Job Memory Thebroadcastin s anddeJayed faxcanhold20 iobs intotal
Cancel scheduled Cancel a
scheduled job
and try
again.
job and try again
Ink Low._ Install
The
print cartridge is low or has run out of ink.To install a new
new ink cartridge
print cartridge, see Replace the printcarlddge on page 56_
Although this messageisdisplayed, you can make a copy or
print a report. Incoming taxes will be stored in memory. You
mustmanually print them,see Reprinting taxes on page 52_
Install ink
Printcadrldge is not installed or improperly installed.
cartridge
Instal! mona ink Theprint cartridge
should
be installed tocopy, pdnt a report or
cartridge
receive a fax.
Job Not Assigned Youaffempted tocancel a scheduled iobbut no jobs are
scheduled..
Care and maintenance 63