Turning On The Phone And General Information; Turning On The Phone; The Display; Changing Display Language - Ericsson GA628 User Manual

Mobile phone for gsm network
Hide thumbs Also See for GA628:
Table of Contents

Advertisement

Turning On the Phone and General Information

This chapter describes the display information you receive from your phone when you use it.

Turning On the Phone

1. Press and hold down the
key until you hear a
NO
click. The display will prompt you to enter the PIN
(the security code that follows your SIM Card).
PIN:
2. Enter the PIN and press
.
YES
The PIN is indicated as **** in the display.
If you entered the PIN correctly, you will be wel-
comed by your phone and it then starts searching for a
network.
6
When a network is found, the indicator light on top of
the phone flashes green once every second and the
standby display is shown (see Figure 6).
Figure 6. Standby display.
Turning Off the Phone
Press and hold the
key until you hear a click
NO
and the display is dark.

The Display

Your phone display will help you to:
Verify that you are dialling correctly.
Check your battery status.
Check your signal strength and service availability.
Indicate that you have received messages.

Changing Display Language

To change the display language see Personalizing
Your Phone, p. 16.
LZT 126 1352/x R2A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents