Advertisement
5
Frame a photograph,
focus,
and shoot.
AEbracketing: The camera will vary exposure
with each shot. The first shot will be taken at
the value currently selected for exposure compensation.
The bracketing
increment
will be subtracted
from the current value in the second shot and
added in the third shot, "bracketing"
the current value. The modified
values can
be higher or lower than the maximum
and minimum
values for exposure
compensation
and are reflected in the values shown for shutter speed and
aperture.
Bracketing ends automatically
after the third shot is taken.
I st shot: unmodified
2nd shot: exposure reduced
[]
The Bracketing Progress Indicator
During AE bracketing, progress is shown by the bracketing
indicator in the information display:
• ,o,: Camera ready to take first shot.
• ,o: Camera ready to take second shot.
0
• ,
:Camera ready to take third shot.
3rd sho t: exposure increased
WBbracketing:Each shot is processed to create three copies, one at the current
white balance setting, one with increased amber, and one with increased blue.
If there is not enough space available on the
memory card to record three images, the
exposure count display in the viewfinder
will
flash. Shooting
can begin when a new
memory card is inserted.
ADLbracketing: T he first shot after bracketing
is activated
is taken with Active
D-Lighting
off, the second at the current Active D-Lighting
setting (_ 94; if
Active D-Lighting
is off, the second shot will be taken with Active D-Lighting
set
to Auto).
Bracketing ends automatically
after the second shot.
In continuous
release mode, shooting
will pause after each bracketing
cycle. If the
camera is turned off before all shots in the bracketing
sequence have been taken,
bracketing
will resume from the next shot in the sequence when the camera is
turned on. To cancel bracketing
before all frames have been recorded, rotate the
mode dial to a setting other than P,S,A,or M.
105
Advertisement
