Table of Contents
Advertisement
II I_
im[_ii | _]i
[1[_ _i
For recording in dim lighting.
Built-in Auto Light
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
Set LIGHT to AUTO.
Light turns onloff automatically
according
to lighting conditions.
Or, set LIGHT to ON/OFF
manually.
I
lX _,_I,
r.J _,,.a
12:00:.OOAM
JAN 11999
DANGER:
Use only replacement
bulb (PART
NO.
VLLW0015)
supplied
by Panasonic
to
reduce
risk of fire.
Handle
new bulb with cloth or tissue as
skin oils will decrease
bulb life.
Remove
lens cover and allow bulb to
cool before
replacing
to avoid possible
burn hazard.
SRc_p
_
_E>appears
in EVF when Light is on.
J
Caution:
Light becomes hot. Never cover Light while
on.
Before you begin...
• Order Part No. VULS0001 (VLLW0015 and
cushions) for replacement bulb unit.
• Set POWER to OFF.
Press in on both sides of lens
cover and pull straight
out and off.
2
Using Tweezers
or needle-nose
pliers, carefully
remove
bulb.
• Take unit to service center if you
need assistance,
Replace
bulb using a clean cloth or
tissue.
Replace
lens cover.
Note:
• Using Light reduces battery operating time.
• Provide proper ventilation when using Light
extensively in hot environment.
• Using Light when the Camcorder is powered
by a car battery may shorten bulb life.
• Set Light to OFF when not in use.
• Handle bulb gently. Excessive force may
cause bulb to crack.
19
Advertisement
Table of Contents
