Table of Contents
Advertisement
Operation Notes
1-A_ | i[_T_lI] I i1_0_]'_
[.] iP.I I ;11 [ (_] t-tl
ile J l[=.] il-"[_-'ll
Remove
the Lens Hood by turning it counterclockwise.
Then attach
an optional
filter or lens,
• Be careful not to touch the lens itself.
• Replace
the Lens Hood after removing the accessory.
A
"1
i
OII
A
-
f
01".
I
I
G
I
I
With a Wide or Telephoto conversion
lens (optional)
attached,
the four corners of the
screen may darken when zoom is set to maximum wide angle.
When attaching the lens hood, a Wide or Telephoto conversion lens (optional),
etc. after
a filter (optional)
has been attached,
the four corners
of the screen
may darken
when
zoom is set to maximum
wide angle.
With two filters (optional) attached,
the four corners of the screen may darken when zoom
is set to maximum wide angle.
I =_ (:_iieJ I_VJl [ i.] ll_i
Connect
an external Microphone
(optional)
using an M3 connector if necessary.
The built-in microphone
is automatically
disconnected
when an external microphone
is plugged in.
I[S] [:_.I i nii[, i ¢kv|_li €i [_,.] qdo]ii Fo.Evi [ _v_vl i_
[_ nm
To Remove
Turn the EVF Eyepiece
counterclockwise
1/8 of a turn.
2
Pull free.
Remove any lint or dust particles
with a soft clean cloth being careful
not to scratch the glass surfaces.
3
To re-install
EVF
Line up the marks on the Eyepiece
with the grooves inside the EVF
shaft and attach. Turn the EVF
clockwise 1/8 of a turn to lock in
place.
47
Advertisement
Table of Contents
