Panasonic DMC-LC40PP Operating Instructions Manual page 80

...... i_%!5!!_!_ ,
ng up the Power Save Mode
When setting this mode, the camera, if it is
not operated for about 2, 5 or 10 minutes, it is
automatically turned off.
1
2
3
4
2,3,4
5
2,3
til_tmmliil
Press the [MENU] button.
Press Ib to open the setup menu.
Press AIV to select [POWER SAVE].
Press <1/1_ to choose the setting time.
You can choose among [2 MIN.], [5 MIN.]
and [10 MIN.].
If selecting [OFF], the power is not turned off
automatically.
Press the [MENU] button.
The menu will disappear.
• If you want to cancel the power save mode, turn the power switch to [ON] again after
turning it to [OFF], or press the shutter button.
• When using the AC adaptor, the power save mode is not available.
• In power save mode, or if the battery charge is low and you have to charge it, turn the
camera off and connect the AC adaptor to the camera DC iN socket. If connecting the AC
adaptor when the power switch is set to [ON], the camera may not function correctly.
80