Panasonic DMC-LC40PP Operating Instructions Manual page 13

1
the Battery
[Preparation]
• Set the power switch to [OFF].
1
Slide the lever in the direction of the
arrow to open the battery door.
2 Insert the battery all the way in, until
it is locked.
3 Close the battery door.
4 Slide the lever to lock the battery
door.
2 [Inserting]
J
[Removing the battery]
1
Slide the lever in the direction of the
arrow to open the battery door.
2 Press the lock _) in the direction of
the arrow to remove the battery.
3 Close the battery door.
4 Slide the lever to lock the battery
door.
3
[Removing]
• If you will not be using the camera for a long
time, remove the battery. (When you insert the
battery again, set the date)
• Before removing the battery from the camera, set
the powerswitch to [OFF].
• The battery supplied with this camera is
exclusively designed for this camera. Do not use
with any other equipment.
CAUTION
Danger of explosion if battery is incorrectly
:_replaced. Replace only with the same or
!_equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
i !_i_i_ i_ii ¸
13