Chapter 5: Special Features; Using True Repeat; Using Block Repeat - Curtis Mathes CMC13005 Owner's Manual

SPECIAL FEATURES
Using True Repeat
You can set your TV/VCR to
automatically repeat a tape or a
section of tape. When you use
True Repeat, your TV/VCR will
play until it reaches the end of a
tape. Then, it will rewind to the
beginning of the tape and begin
playing again.
Press MENU to display the
menu.
2 Press CHV until "VCR Setup"
is selected. Press VOL+.
3 Press CHV until "True
Repeat" is selected. Press
VOL+ to turn True Repeat on.
4 Press MENU to exit the
menu.
5' Insert and play a pre-
recorded vtdeo tape.
The TV/VCR, will .play the tape
unt t reacnes the ena.
tThhen, t he TV/_!CR will stop
e tape, rew nat to the
beg!nnmg, and begin playing
again.
If the TV/VCR reaches an
unrecorded section of tape
before it reaches the end, it
will search forward and
_heck the tape a,gain.. If it.
haS a recoraea section oT
tape, it will beqin playing. If
the tape is stillblanK, it will
continue to search forward,
until it reaches the end of the
tape.
Press STOP to end the
repeat.
Using Block Repeat
Block Repeat allows you to
repeat a section of tape that you
select. You can repeat this
section of tape (the "block")
from one to ten times. "Repeat"
section should be set up at a
minimum ten-second interval.
Press MENU to display the
menu.
2 Press CHY until "VCR Setup"
is selected. Press VOL+.
3 Press CHV until "Block
Repeat" is selected. Press
VOL+ to select the number of
times you want your "block"
to repeat.
4
5
You can choose to have your
"block" repeat from one to
ten times.
Press MENU to exit the
menu.
Insert and play a pre-
recorded video tape.
Press REPEAT at the
beginning of the "block" you
want to repeat. ("Repeat
setting" appears on the
screen when the button is
pressed.)
30 CI tAI'Tb, R FIVI,,: _<;I'I,,C:IAI. FI',AYUI-_ES