Table of Contents
Advertisement
TROUBLESHOOTING
]
identifying TV Problems
Poorpicture, no picture, blurred
picture, or blue screen.
• Try another channel. Make
sure the unit is plugged into a
working wall outlet.
• Adjust the antenna.
• Press LINE IN.
• Check all wire connections.
Poorsoundquality.
• Try another channel.
• Adjust the antenna.
No color, wrong colors or tints.
• Make sure the program is
broadcast in color.
• Adjust the picture settings.
• If the set is moved or turned
in a different direction, the
power should be OFFfor at
least 30 minutes.
Picture rolls vertically.
• Adjust the antenna.
• Check all wire connections.
identifying VC£
Problems
Unit won't turn on.
• Make sure the unit is plugged
into a working wall outlet.
• Pressthe POWERbutton.
Unit won't take video tape.
• Make sure the tape is
window side up with the
arrow pointing away from
you.
• Make sure there is no other
tape in the compartment,
Unit didn'trecord a program.
• Make sure the antenna or
cable is connected and that
the TV/VCRis receiving the
broadcast signal.
• Make sure the record safety
tab on the tape is intact.
Unit didn't record a timer
program.
• Make sure the unit was
turned off.
• Checkthe programmed start
and stop times.
• Make sure the time is set
correctly.
There is no picture, the picture
is distorted during video tape
playback, or noise or streaks
appear in the picture.
• Adjust the tracking.
• Clean the video heads.
• Make sure there has been a
recording on the tape.
Youcan't receive regular
broadcasts.
• Checkthe antenna or
cable connections.
Rewind commanddoesn'twork.
• Make sure the VCR is not in
pause mode.
• Make sure the tape hasn't
already been rewound.
Fastforward command doesn't
work.
• Make sure the VCR is not in
pause mode.
• Make sure the tape hasn't
already been forwarded.
Picture is streaked during
pause mode.
This is normal for SP recordings.
CHAPTER
SIX:
TROUBLES[tC)O'IINC
37
Advertisement
Table of Contents
