Chapter 5: Special Features; Using True Repeat; Using Block Repeat - Curtis Mathes CMC13005 Owner's Manual

C F
HAPTER IVE

Using True Repeat

You can set your TV/VCR to
automatically repeat a tape or a
section of tape. When you use
True Repeat, your TV/VCR will
play until it reaches the end of a
tape. Then, it will rewind to the
beginning of the tape and begin
playing again.
1
Press MENU to display the
menu.
2
Press CH until "VCR Setup"
is selected. Press VOL+.
œ√
3
Press CH until "True
Repeat" is selected. Press
VOL+ to turn True Repeat on.
30 C F : S
HAPTER IVE PECIAL
S F
PECIAL EATURES
œ√
4
Press MENU to exit the
menu.
5
Insert and play a pre-
recorded video tape.
The TV/VCR will play the tape
until it reaches the end.
Then, the TV/VCR will stop
the tape, rewind it to the
beginning, and begin playing
again.
If the TV/VCR reaches an
unrecorded section of tape
before it reaches the end, it
will search forward and
check the tape again. If it
finds a recorded section of
tape, it will begin playing. If
the tape is still blank, it will
continue to search forward,
until it reaches the end of the
tape.
6
Press STOP to end the
repeat.
F
EATURES

Using Block Repeat

Block Repeat allows you to
repeat a section of tape that you
select. You can repeat this
section of tape (the "block")
from one to ten times. "Repeat"
section should be set up at a
minimum ten-second interval.
1
Press MENU to display the
menu.
2
Press CH until "VCR Setup"
is selected. Press VOL+.
œ√
3
Press CH until "Block
Repeat" is selected. Press
VOL+ to select the number of
times you want your "block"
to repeat.
œ√
You can choose to have your
"block" repeat from one to
ten times.
4
Press MENU to exit the
menu.
5
Insert and play a pre-
recorded video tape.
6
Press REPEAT at the
beginning of the "block" you
want to repeat. ("Repeat
setting" appears on the
screen when the button is
pressed.)