Setting The Clock - Curtis Mathes CMC13005 Owner's Manual

[TV
OPERATION]
Programming
the Channels, continued
• When entering three-digit
channels, press the +100
button on the remote control
first. For example, to select
channel 104,press +100,then
press 0, then 4.
Youcan manually add or erase a
channel from your TV/VCR's
memory.
Press MENU to display the
menu.
2 Press CHV until "Setup" is
selected.
3 Press VOL+to display the
Setup menu,
4 Press CHV until "Add/Erase"
is selected.
Press VOL+.
5' Press VOL+or VOL-to select
a channel.
Press CHV until "Add/Erase"
is selected.
Press VOL+to select
"Added" or "Erased".
You can still view a channel that
is not stored in memory by using
the number buttons to select the
channel directly.
Setting the Clock
Torecord programs while you
are away, or to use the sleep
timer, you must first set the
clock and calendar.
There are two ways to set the
clock:
Option 1, Manual: The digits for
hours and minutes are entered
directly.
Option 2, Auto: The TV's clock is
synchronized to a time signal
sent out by the local PBS
channel.
Option1: Setting the clock
directly ("Manual" Method)
Press MENU to display the
menu.
2 Press CHV until "Time Set"
is selected. Press VOL+.
3 Press VOL+.
The Time Set menu appears.
Press VOL+to select the hour
digits. Press CHV or CHA
repeatedly until the correct
hour appears.
v" Besureto setthe correcttime of
day (amor pro), w hich appearsto
the rightof the minutes.
18 CI tA]'TI',R TI tREE: TV C)Pb, R ArEIC)N