Table of Contents
Advertisement
[ [NSTALLATION
I
Connecting VHF and UHF
Antennas,
continued
If you use a different 300-ohm
antenna with twin flat leads, fol-
low the directions
below, but skip
step 1.
Push the stem of the rod
antenna into the antenna
mount.
2 Connect both antenna leads
to a combiner.
3 Plug the combiner
into the
terminal on the rear panel of
the TV/VCR.
Connecting Cable TV
Systems to the TVNCR
Choose one of the sections below
for connecting a cable system.
,/ This TV/VCRis cable read),;you
donrt needa converter for basic
cable channels,
Cable Without a
Converter Box
To connect cable without
a
converter
box:
Plug the incoming cable into
the terminal on the rear
panel of the TV/VCR.
Cable With a
Converter Box
If your cable company
scrambles
some channels
and
requires you to use a converter
box for only those channels, use
these instructions.
You will need the following
pieces of equipment,
which you
can purchase from an
electronics
store:
•
A two-way
splitter
•
An RF (A/B) switch
•
Four lengths of coaxial cable
Plug the incoming cable into
the 2-way splitter.
Incoming
Splitter
(J'l
tAPq'H-_
TV_;()
: I NS'I
AI.LA]'ION
13
Advertisement
Table of Contents
