Table of Contents
Advertisement
[ SPECIAL
FEATURES
]
Copying, or Dubbing, a Video
To make a copy, or "dub," of another video tape, you need:
•
your TV/VCR
•
a separate VCR (or camcorder)
•
two A/V cables with connectors.
(You can find these at most
electronics
supply stores.)
Important warning:
One Federal Court has held that unauthorized
recording
of copyrighted
TV programs
may be an infringement
of copyright
laws.
Making the Connections
Attach one end of the video/audio
cable to the VIDEO/AUDIO OUT
connector
of the playback VCR (or camcorder)
and the other end to
the VIDEO/AUDIO IN connector
of the TV/VCR.
Dubbing
Insert the video cassette tape you want to copy into the playback
VCR (or camcorder).
2 Insert a blank video tape (or any video tape with the record safety
tab intact) into the recording
TV/VCR.
3 Press LINE IN on the remote control of the recording
TV/VCR.
TVFro_tpanellnpulJacks
36
CI
tA]"]'b,R
FIvb,:
_q}IH,,C:IAI. F I',A]'UI-_ES
4
5'
The words "Line in" appear in the upper left corner of the TV/VCR
screen.
_/ TheTV/VCR w ill berecording f romthe incoming l ineratherthanfromtile
normal broadcast signal,
"Line in" will remain on-screen until the PLAYbutton is pressed on
the playback VCR.
To begin recording, simultaneously press RECon the recording
TV/VCR'sremote control and PLAYon the playback VCR (or
camcorder).
When you are finished, press STOPon both the VCR (or
camcorder) and the TV/VCRto stop recording.
Press LINE IN to return to normal TV viewing.
Advertisement
Table of Contents
