Setting The Clock - Curtis Mathes CMC13005 Owner's Manual

TV O
PERATION
Programming
the Channels, continued
• When entering three-digit
channels, press the +100
button on the remote control
first. For example, to select
channel 104, press +100, then
press 0, then 4.
You can manually add or erase a
channel from your TV/VCR's
memory.
1
Press MENU to display the
menu.
2
Press CH until "Setup" is
selected.
3
Press VOL+ to display the
Setup menu.
œ√
4
Press CH until "Add/Erase"
is selected.
Press VOL+.
18 C T : TV O
HAPTER HREE
œ√
5
Press VOL+ or VOL- to select
a channel.
6
Press CH until "Add/Erase"
is selected.
Press VOL+ to select
"Added" or "Erased".
œ√
You can still view a channel that
is not stored in memory by using
the number buttons to select the
channel directly.
PERATION

Setting the Clock

To record programs while you
are away, or to use the sleep
timer, you must first set the
clock and calendar.
There are two ways to set the
clock:
Option 1, Manual: The digits for
hours and minutes are entered
directly.
Option 2, Auto: The TV's clock is
synchronized to a time signal
sent out by the local PBS
channel.
Option 1: Setting the clock
directly ("Manual" Method)
1
Press MENU to display the
menu.
2
Press CH until "Time Set"
is selected. Press VOL+.
œ√
3
Press VOL+.
The Time Set menu appears.
œ√
4
Press VOL+ to select the hour
digits. Press CH or CH
repeatedly until the correct
hour appears.
œ√
Be sure to set the correct time of
day (am or pm), which appears to
the right of the minutes.