Unpacking And Preassembly; Unpacking And Checking Contents - Craftsman 113.198110 Owner's Manual

unpacking and preassembly
WARNING: TO AVOID INJURY FROM UNEXPECT-
ED STARTING OR ELECTRICAL SHOCK, DO NOT
PLUG THE POWER CORD INTO A SOURCE OF
POWER UNTIL ALL ASSEMBLY AND ALIGNMENT
STEPS ARE COMPLETE. THIS CORD MUST
REMAIN UNPLUGGED WHENEVER YOU ARE
WORKING ON THE SAW.
Model 113.198110 Radial Saw is shipped complete
in one box.
1. Unpacking and Checking Contents
(a) Separate all "loose parts from packaging
materials and check each item with "Table of
Loose Parts" to make sure all items are
accounted for, before discarding any packing
material.
WARNING: IF ANY PARTS ARE MISSING, DO NOT
ATTEMPT TO ASSEMBLE RADIAL SAW, PLUG IN
THE POWER CORD, OR TURN THE SWITCH ON
UNTIL THE MISSING PARTS ARE OBTAINED AND
ARE INSTALLED CORRECTLY.
Item No. Description Qty.
A Basic Saw Assembly ................... 1
B Leg ................................... 4
C Stiffener Lower ........................ 4
D Stiffener Leg .......................... 4
E Channel, Table Mounting .............. 2
F Front Table ........................... 1
G Rip Fence ............................. 1
H Table Spacer .......................... 1
I Rear Table ............................ 1
J Owners Manual 1
K Trim Ledge ........................... !
L Bag of Loose Parts Containing:
M Shaft Wrench ....................... 1
N Arbor Wrench ....................... 1
O Handwheel Assembly ................ 1
P Bag of Loose Parts #507529 .......... 1
Q Bag of Loose Parts #507661 .......... 1
R Bag of Loose Parts #507498 .......... 1
S Bag of Loose Parts #507499 .......... 1
T Cap Trim L.H ........................ 1
U Cap Trim R.H ........................ 1
c_ €:
el:
A
L
,S
\
N
U