Usingthe Probe - GE Profile JGB900 Owner's Manual And Installation Instructions

Usingthe probe. (on
some models) wwvv.CEApp/iances.com
For many foods, especially roasts and poult_ internal food temperature is the best test for doneness. The temperature
probe takes the guesswork out of cooking foods to the exact aloneness you want.
Use of probes other than the one provided
with this product may result in damage to
the probe.
Use the handles of the probe and plug
when inserting and removing them fl'om
the fi)od and outlet.
P!ug
Probe
Handles
The temperature probe has a
skewer-like probe at one end and a
plug at the other end that goes hTto
the outlet h7the oven.
Toavoiddamaging yourprobe,donot usetongs
topull on thecablewhenremoving i_
Toavoidbreaking theprobe,make surefoodis
completely d efrosted beforeinsemng.
Topreventpossible burns,do not unplug the
probe from the outlet until the oven has cooled
Neverleaveyourprobeinsidetheovenduring
a self-cleaning c ycle.
Donotstore theprobe in the oven.
_Mter preparing tile meat and placing it on
a trivet or on the broiler pan grid, follow
these directions fin" proper probe
placement.
Insert the probe completely into the meat.
It should not touch the bone, tat or gristle.
For roasts Mth no bone, insert the probe
into the meatiest part of the roast. For
bone-in ham or lamb, insert the probe into
the center of the lowest large muscle.
Insert the probe into the center of dishes
Stlch as Illeat
loat
or
casseroles.
Insert the probe into the meatiest part of
the inner thigh fi'om below and parallel to
the leg of a whole turkey:
How to Set the Oven For Cooking When Using the Probe
[] Insert the probe into the fi)od. []
[] Plug the probe into the outlet in the
oxen. Make sure it's pushed all the
way in. Close the oxen (loo_:
Touch the PROBE
pad.
[]
[] Touch the number pads to set
the desired internal fi)od or meat
temperature between 100°F and 200°F.
[] Touch the BAKEpad.
[] Touch the number pads to set the
desired oxen temperature.
[] Touch
the START pad.
Thed/splaywill flashif theprobeisinserted into the
outletandyouhavenotset a probetemperature a nd
touched theSTABT pad
The display Mll show LO until the internal
temperature of the food reaches 100°F;
then the changing internal temperature
will be shown.
X_q_en the internal temperature of the
toed reaches the number you have set,
the probe and tile oven ttlrn off and
the oven control signals. To stop the
signal, touch the CLEAR/OFFpad. Use
hot pads to remove the probe ti'om
the toed. Do not use tongs to pull on
it--they might damage it.
To change the oven temperature during
probe cooking, touch the BAKE pad and
then tile number pads to set the new
temperattu'e.
ff theprobeis removed fromthefoodbeforethe
finaltemperature i s reached, a tonewill sound
and thedisplay will flashuntil theprobeis
removed fromtheoven.
You canuse the t/Yner e venthoughyoucannot
usetimed ovenoperationswhile usingthe
probe.
2/