Using The Oven; Power Outage; Oven Light - GE Profile JGB900 Owner's Manual And Installation Instructions

Usingtheoven.
Toavoid possible bums, place the shelves in the desired position before you turn the oven on,
dl
Before you begin...
The shelves have su)[>]ocks, so d_at _he_
placed correcdv (m the shelf supports (A
through E), they _d]] stop before comim_g
completely ollt, amid
Will
_/()t tilt.
\_,l_em_ p]acim_g m_d remo',im_g cook,;are,
pu]] the shelf ol_t to t]_e bm_p om_ t]_e shelf
SllppOrL
Ye remove a shelf, [:m]] it toward yol_, d]t d_e
_'om_t el_d Iq> m_d [m]] it ore.
YerepNce, place the elm of the shelf (sto[>
locks) o_ the support,
tilt Iq::_ the f_'<mt amid
NOTE:Theshelfis notdesigned toslideoutat tire
special l ow shelf(fl)position.
Ttie oven has 5 shelf positions.
It also has a special low shelf
position (R)for extra large items,
such as a large turkey.
i I
Plastic items on the cooktop may
melt if left too close to the vent.
Ventappearance and location var,A
Oven Vent
Your o_en is _ented through ducts at the
rear of the range. Do not block these ducts
_dmn cooking in the oxen--it is important
that the flow of hot air ti'om the oxen and
fl'esh air to the oxen burner be
mfinterrupted. Avoid touching the xent
o )enings OF neai'bv StlYIilces " , , (hlYIng o_,en or
broiler operation--they may become hot.
Handles of potsandpanson thecooktop may
become hot if left toocloseto thevent
Do not leave plastic or flammable rtems on the
cooktop--they may melt or rgnite if left too close
to the vent
Do not leave dosed contarberson the cooktop.
Thepressure in closed containers may increase,
which may causethem to burst
Metal itemswi// become very hot if theyareleft
on thecooktop, a ndcouldcause bums.
Power Outage
CAUTION: D onotmakeanyattemptto operatethe
electricrgnitionovendunngan e/ectrrca/ power
failure.
The oven or broiler cannot be lit dining a
power fidlm'e. (;as will not flow mfless the
glow bar is hot.
If the oven is in use when a power fidlm'e
OCCIII'S_ the ()veil btlI'neF shuts off and
cannot be re-lit tmtil power is restored. This
is because the flow of gas is automatically
stopped and will not resunle when power is
restored tmfil the glow bar has reached
operating temperature.
Oven Light
Touch the
OVEN LIGHTpad
on the upper
control panel to mrn the light on or ofl_
On some models, the
OVENUGHYswitch
is
on the lower fl'ont control panel.
16