Specifications - Sharp HT-SB200 Operation Manual

Specifications
HT-SB200
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
■ General
Power source
Power
consumption
Output power
Speaker
Audio output
terminals
18
DC IN 12V 4A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power on: 10 W
Power stand-by: 0.6 W (*)
Front speaker:
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Subwoofer:
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
2.1-way Speaker System
Front Speakers: 38 mm (1-1/2") Full
Range
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Speakers: 12 ohms/channel
Subwoofer: 3 ohms
(12 ohms x 4 parallel connection)
Input terminals Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Dimensions Width: 800 mm (31-1/2")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 1.75 kg (3.86 lbs.)
(*) This power consumption value is obtained when in the
power stand-by mode.