Ac Power Connection; Remote Control - Sharp HT-SB200 Operation Manual

AC power connection

After checking all the connections have been made correctly,
connect the AC power lead to the AC power input socket, then
to the wall socket.
■ Using with the AC/DC adaptor
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC IN socket
on the speaker.
3
Plug the AC power lead into a wall socket. The
STAND-BY indicator will turn RED when AC power is
applied. The power indicator will turn GREEN when
the system in "ON".
AC/DC Adaptor Cable
DC IN socket
(DC 12V)
AC power lead
3
(AC 100 - 240 V ~ 50/60 Hz)
Notes:
●
Unplug the AC/DC adaptor from the wall socket if the
speaker will not be used for a long period of time.
●
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
2
1
AC/DC Adaptor
Wall socket

Remote control

■ Battery installation
1 Insert pin into the hole as shown and pull to open the
battery holder.
Back of
remote control
2 Remove the old battery from the battery holder, insert
the new battery and then slide the battery holder back
into the remote control.
Battery holder
Battery type
Locking tab
Polarity (+) symbol
Precautions for battery use:
●
Remove the battery if the speaker will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
HT-SB200
Pin
Positive (+) side up
13