Sharp HT-M700H Operation Manual page 55

Speaker level setting
If sounds from the speakers are uneven, you can equalise them by
adjusting the speaker levels.
1
Press the SET UP AMP button.
2
Within 10 seconds, press the
button to select "SP LEVEL",
and then press the ENTER button.
3
Within 10 seconds, press the
button to select the desired
speaker.
The indicator of the selected speaker
flashes.
4
Within 10 seconds, press the
button to adjust the level.
You can adjust the level at 1 dB in-
tervals.
To set the distance of other speak-
ers, repeat the operation from step
3.
5
Press the RETURN button twice.
The setting is complete.
Notes:
The speaker level setting is only available for the front speakers
and subwoofer when the surround is "STEREO" or "VIRTUAL
(SURROUND)".
If subwoofer sound is distorted, lower the subwoofer level.
or
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select ENTER Enter Return
or
Speaker Level
Front L 0 dB
Center 0 dB
Front R 0 dB
Surround R 0 dB
Surround L 0 dB
Sub Woofer 0 dB
Select Change Return
or
Speaker Level
Front L 0 dB
Center 0 dB
Front R 0 dB
Surround R +3 dB
Surround L 0 dB
Sub Woofer 0 dB
Select Change Return
Test tone
You can check each speaker sound by a test tone. Readjust the vol-
ume set in "Speaker level setting".
1
Press the SET UP AMP button.
2
Within 10 seconds, press the
button to select "TONE", and
press the ENTER button.
The test tone will be heard from each speaker in order, at about
2-second intervals.
Test Tone
Front L
Center
Front R
Surround R
Surround L
Sub Woofer
Select
To adjust speaker levels
Whilst the test tone is heard:
Adjust the level with the or
Press the or to select a speaker.
3
Press the RETURN button twice.
The setting is complete.
Note:
The test tone is produced only from the front speakers and
subwoofer when the surround is "STEREO" or "VIRTUAL (SUR-
ROUND)".
or
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select Enter Return
ENTER
0 dB
0 dB
0 dB
+3 dB
0 dB
0 dB
Change Return
button.
HT-M700H
52