Sharp HT-M700H Operation Manual page 54

Changing the default setting of the amplifier (continued)
HT-M700H
In the stop mode, you can change the amplifier settings on the
TV screen.
1
Press the SET UP AMP but-
ton.
The amplifier setting screen
appears.
2
Press the or
ENTER button.
3
Press the , ,
to change the setting.
(The number of repetitions depends on the setting item.)
To change other settings, begin from step 2.
4
Press the RETURN
The setting is complete.
Notes:
You cannot change the amplifier settings unless the input source
is set to DVD/CD.
The amplifier settings cannot be changed in the tuner mode and
do not affect the tuner sound.
51
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select Enter
ENTER
button to select the menu and press the
or button
Speaker Delay
Front L
Center
Front R
Surround R
Surround L
Select Change
Repeat the operation as instructed.
button twice.
Speaker delay setting
When some of the speakers are at a different distance from the lis-
tening point, you can select the speaker delay to make it seem as
though the speaker distances are the same.
1
Press the SET UP AMP button.
2
Within 10 seconds, press the
button to select "SP DELAY",
and then press the ENTER button.
Return
3
Within 10 seconds, press the
button to select the desired
speaker.
2.0 M
The indicator of the selected speaker
2.0 M
flashes.
2.0 M
2.0 M
2.0 M
4
Within 10 seconds, press the
Return
button to select the distance.
You can change the distance in
0.1 m steps.
To set the distance of other speak-
ers, repeat the operation from step
3.
5
Press the RETURN
The setting is complete.
Note:
The speaker delay setting is not available when the surround is
"STEREO" or "VIRTUAL (SURROUND)".
or
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select Enter
ENTER
or
Speaker Delay
Front L 2.0 M
Center 2.0 M
Front R 2.0 M
Surround
R 2.0 M
Surround L 2.0 M
Select Change
or
Speaker Delay
Front L 2.0 M
Center 2.0 M
Front R 2.0 M
Surround R 3.3 M
Surround L 2.0 M
Select Change
button twice.
Return
Return
Return