G Selecting The Colour Mode; Selecting The Resolution - Sharp AR-NB3 Network Scanner Operations

Selecting an INCH original size
4
Select the original size with the [ ] or
[ ] key.
To return to the selection of inch original sizes, press
the [ ] key and return to step 2.
SELECTING THE COLOUR MODE
After placing the original, you can select an appropriate colour mode for the original type. Place the original in the
document feeder tray or on the document glass (steps 1 to 3 on
The factory default setting for the colour mode is "COLOUR". To change the colour mode, follow these steps.
1
Press the [COLOUR MODE] key.
PAPER PAPER COP COP
COPY EXPOSURE COPY EXPOSURE
SELECT SELECT RAT RAT
SCAN SCAN COLOUR MODE COLOUR MODE
RESOLUTION ADDR
RESOLUTION ADDRE
FAX FAX PROGRAM PROGRAM
The colour mode
selection screen appears.
2
Select the colour mode with the [ ] or
[ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
The selected mode is
highlighted.

SELECTING THE RESOLUTION

The scanning resolution can be selected. After selecting scan mode and placing the original (steps 1 to 3 on
20), perform the procedure below.
The factory default setting for the resolution is "150dpi" (e-mail/FTP mode).
If you need to change the resolution, follow these steps.
1
Press the [RESOLUTION] key.
PAPER COPY AUT
COPY EXPOSURE
SELECT RATIO IMAG
SCAN COLOUR MODE FORM
RESOLUTION ADDRESS
FAX PROGRAM BROADC
The resolution selection
screen appears.
ORIGINAL SIZE
INCH
11x17
8 x14 1
2
8 x13
1
2
COLOUR MODE
COLOUR
GRAY
B/W
COLOUR MODE
COLOUR
GRAY
B/W
RESOLUTION
100dpi
150dpi
200dpi
300dpi
HOW TO USE THE NETWORK SCANNER FUNCTION
5
Press the [OK] key.
You will return to the base
OK
screen and the selected original
size will appear in the original
display.
To cancel a manual original size setting,
Note
press the [CA] key.
If it is not possible to select the actual original
size, select a size that is larger than the actual
original size. If a smaller size is selected, part
of the original will not be transmitted.
page 20) and then follow the steps below.
COLOUR: Select this mode for colour originals.
GRAY : Select this mode for a black and white
photograph or when a monochrome image
is needed.
B/W : Select this mode when you wish to scan a
photo in monochrome or when you wish to
make text clearer.
3
Press the [OK] key.
You will return to the base
screen and the selected mode
BACK OK
will appear in the colour mode
display.
GHI
Two-sided scanning is not possible when
Note
"COLOUR MODE" is set to "COLOUR" or "GRAY".
2
Select the resolution with the [ ] or
[ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
The selected resolution is
highlighted.
page
RESOLUTION
100dpi
150dpi
200dpi
300dpi
27
2