Using The Key Operator Programs - Sharp AR-NB3 Network Scanner Operations

USING THE KEY OPERATOR PROGRAMS

1
Press the [SPECIAL FUNCTION] key.
2-SIDED
COPY
SPECIAL FUNCTION
DUPLEX SCAN
ACC.
The special function
screen will appear.
2
Select "KEY OPERATOR PRG." with
the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
3
Press the [OK] key.
BACK OK
GHI
The key operator code
entry screen appears.
4
Enter the key operator code with the
numeric keys.
OK
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
@.- _
FUNCTION
ACC. #-C READ-END
• " " will appear for each digit will enter.
• The mode selection screen will appear.
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
KEY OPERATOR PRG.
Enter key operator
code.
KEY OPERATOR CODE:
-----
MODE SELECT
KEY OP. # CHANGE
COPIER
PRINTER
SCANNER
5
Select the desired mode with the [ ]
or [ ] key.
6
Press the [OK] key.
OK
The settings of the
selected mode will
appear.
Example: The screen when "SCANNER" is selected.
7
Select the desired program with the
[ ] or [ ] key.
• If a checkbox appears to the left of the program
name, the program is enabled by pressing the [OK]
key to make a checkmark appear. The program is
disabled by pressing the [OK] key once again to
clear the checkmark. After making the selection, go
to step 9.
• If a checkbox does not appear by a program, press
the [OK] key to display the settings screen for the
program.
8
Press the [OK] key and follow the
instructions in the program screen.
OK
9
To use another program for the same
mode, select the desired program with
the [ ] or [ ] key.
To use a program for a different mode, press the
[BACK] key and select the desired mode. Press the
[CA] key to exit the key operator programs.
MODE SELECT
KEY OP. # CHANGE
COPIER
PRINTER
SCANNER
SCANNER
DISABLE USB SCAN
INITIAL COND.
33
3