Sharp FO-475 Operation Manual page 5

Introduction
Automatic dialling
Memory size*:
Fax paper
Automatic document
feeder
Paper cutting method:
Modem speed
Transmission time*
Display
Reception modes
Resolution
* Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode,
excluding time for protocol signals (i.e., ITU-T phase C time only).
Welcome, and thank you for
choosing a Sharp facsimile!
The features and specifications
of your new Sharp fax are
shown below.
Rapid Key Dialling: 10 numbers
Speed Dialling: 20 numbers
512 KB (approx. 20 average pages with no voice
messages recorded, or 24 minutes of voice mes-
sages (including OGMs) with no documents in
memory)
Initial starter roll (included with fax machine):
10 m roll
Recommended replacement roll:
FO-40PR 50 m roll
10 sheets max.
Automatic cutter
9600 bps with automatic fallback to 7200, 4800,
or 2400 bps
Approx. 15 seconds (Sharp special mode)
16-digit LCD display
FAX, TEL, TEL/FAX, ANS.
Horizontal:
8 lines/mm
Vertical:
Standard: 3.85 lines/mm
Fine/Halftone: 7.7 lines/mm
Super fine (transmission only):
15.4 lines/mm