Sharp FO-475 Operation Manual page 106

Option Settings
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number
from 1 to 4 as follows:
1 (ALWAYS PRINT):
2 (ERR/TMR/MEM.
PRINT):
3 (SEND ONLY):
4 (NEVER PRINT):
Initial setting: 2
FUNCTION
Enter a number
1
from to
Setting 7: DIAL MODE
This sets the mode of dialling. Press 1 if you are on a tone dial line, or 2 if you
are on a pulse dial line.
Initial setting: 1
FUNCTION
TONE
1
Note: For all units installed in New Zealand, select "1" for tone dialling. The
pulse setting "2" will not operate correctly and must not be used.
94
A report will be printed after each transmission,
reception, or error.
A report will be printed after an error or a timer
operation.
A report will be printed only after a transmission.
A report will never be printed.
4
Press
DIAL MODE
4
4
Press
PULSE
or
2
PSEUDO RING DUR.
until
TRANSACTION PRINT
display
shows:
until
DIAL MODE
display
shows:
STOP
STOP