Table of Contents
Advertisement
STORING DESTINATIONS
To store scanning destinations, click "Destination" in the Web page menu frame. "Destination" can also be used to
edit or clear stored destinations. (p.16)
A total of 200 destinations* can be stored, including E-mail, FTP, Desktop, and Group destinations. Up to six of
these destinations can be assigned to the machine's [SCAN MENU] keys.
Stored destinations can be selected in the machine's operation panel when transmission is performed.
* Multiple e-mail addresses (up to 100) can be stored as a group. Note that this may reduce the maximum number
of destinations (normally 200) that can be stored.
Click here.
Storing destinations for Scan to E-mail
1
Click "Destination" in the menu frame.
2
Click "E-mail".
To perform Scan to E-mail, the SMTP server settings must first be established. Click "Application" in the Web
Note
page, click "SMTP" in the screen that appears, and then enter the settings under "SMTP Setup" (p.9).
BEFORE USING THE NETWORK SCANNER FUNCTION
E-mail:
FTP:
Desktop:
Group:
3
Enter the destination information.
For explanations of each of the items, click "Help"
in the menu frame.
Use "Scan Mode" to select a set of
Note
previously stored scanning settings (see
"STORING SCANNING
page 11). The list shows the names of the
stored scan modes.
4
When you have completed all of the
entries, click "Submit".
The entries will be stored.
- 12 -
See below
Refer to page 13.
Refer to page 14.
Refer to page 15.
SETTINGS" on
1
Advertisement
Table of Contents
