G Image Orientation And Standard Original Loading Orientation - Sharp AR-NB2 Operation Manual

Network expansion kit for network scanner

Hide thumbs Also See for AR-NB2:

Table of Contents

IMAGE ORIENTATION AND STANDARD ORIGINAL

LOADING ORIENTATION

When using the document glass, the original should be placed face down so that it is centered vertically on the glass

with the top edge of the original at the left edge of the glass.

When using the SPF/RSPF, the original should be placed face up in the middle of the document feeder tray, with the

top of the original to the right.

Document glass

Long horizontal originals of size 11" x 17", 8-1/2" x 14", A3, or B4 can only be placed as shown below.

For this reason, the scanned image will be rotated 90° when viewed on a computer.

Document glass

When an original is scanned using the document glass, the scanning area is determined by the "Scan Size" setting

of the scan mode stored in the destination information. If the orientation of the placed original does not agree with

the scan size setting, not all of the original will be scanned. The following examples show how the scan size setting

affects the resulting image when a letter original is scanned on the document glass.

Document glass

To change the "Scan Size" setting, see

SPF/RSPF

Scanning result

Scan size = Letter

"STORING SCANNING

SETTINGS" (p.11).

- 20 -

USING THE NETWORK SCANNER FUNCTION

Scanning result

Scan size = Letter-R

Table of Contents

Ar-nb2n