(When Using An Ldap Server) - Sharp AR-NB2 Operation Manual

CONFIGURING LDAP SERVER SETTINGS (WHEN
USING AN LDAP SERVER)
If mail addresses are managed on your network by an LDAP server, the e-mail addresses stored in the LDAP server
can be used for Scan to E-mail.
To allow the machine to use the e-mail addresses in the LDAP server, the LDAP server settings must be configured in the Web page.
1
Click "Application" in the menu frame.
2
Click "LDAP".
3
Select "Enable" in the "LDAP Setup" menu.
4
Click "Submit".
5
Configure the settings in "Global
Address Books List".
For explanations of each of the items, click "Help"
in the menu frame.
6
When you have completed all of the
entries, click "Submit".
The entries will be stored.
BEFORE USING THE NETWORK SCANNER FUNCTION
- 10 -
1