Storing, Deleting, And Using Original Sizes; G Storing Or Deleting An Original Size; G Using A Stored Original Size; Storing Or Deleting An Original Size - Sharp AR-FX8 Operation Manual

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
G To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.

STORING OR DELETING AN ORIGINAL SIZE

1 Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO A4
ORIGINAL
Touch the key under [SCAN SIZE].
2
SCAN SIZE
100%
AUTO A4
2-SIDED 2-S
BOOKLET TAB
Touch the [CUSTOM SIZE] key.
3
5R
MANUAL
B5
B5R
CUSTOM
SIZE
STANDARD SI
Touch the [STORE/DELETE] key.
4
RECALL STORE/DELETE
Touch the original size key (
5
you wish to store or delete.
X68 Y78
RECALL
STORE/DELETE
stored size, touch the key that shows the size that you
wish to delete or change.
G If you are storing an original size, go to step 6.
G If you are deleting an original size, go to step 8.
G If you are changing an original size, go to step 8
and touch the [AMEND] key.
) that
To store an original size,
touch a key that does not
show a size ( ).
Keys that already have an
original size stored will show
the stored size ( ).
X68 Y78
To delete or change a
6 Enter the X (width) and Y (length) dimensions
of the original with the
X
CANCEL OK
A
Y
(64 432)
X 420
mm
(64 297)
Y 297
mm
RECALL STORE/DELETE
length of 64 to 297 mm (2-1/2 to 11-5/8 inch) can
be entered in Y.
7 Touch the [OK] key.
The original size entered in step 6 is stored in the
key selected in step 5.
To exit, touch the [ORIGINAL] key.
When you touch a key that shows an
8
original size in step 5, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
G To cancel the procedure, touch the [CANCEL] key.
G To delete the selected original size, touch the
[DELETE] key.
G To change the original size stored in the key, touch
the [AMEND] key. The screen of step 6 will appear
to let you change the size.
To exit, touch the [ORIGINAL] key.
9

USING A STORED ORIGINAL SIZE

1 Follow steps 1 to 3 of "STORING OR
DELETING AN ORIGINAL SIZE".
Touch the original size key that you wish
2
to use.
X68 Y78
RECALL STORE/DELETE
3 Touch the [OK] key.
The stored original size is called up.
keys.
X (width) is initially
selected.
Enter X and then touch
the ( ) key to enter Y.
A width of 64 to 432 mm
(2-1/2 to 17 inch) can be
entered in X, and a
1-9
1