Programming; Storing, Editing, And Deleting Auto Dial Keys, Programs, And Relay Groups - Sharp AR-FX7 Operation Manual

6
Chapter 6

PROGRAMMING

This chapter explains how to program auto dial keys (rapid and group keys), programs, relay groups, and user
indexes. It also explains how to print out lists of stored settings.

PROGRAMMING

Auto dial keys (rapid and group keys), programs, relay groups, and user indexes are stored and edited using the
operation panel of the machine.
STORING, EDITING, AND DELETING
AUTO DIAL KEYS, PROGRAMS,
AND RELAY GROUPS
This section explains the procedures for storing, editing, and deleting auto-dial keys (rapid keys and group keys),
programs, and relay groups. (The procedure for using rapid keys and group keys is explained in "TRANSMISSION
BY AUTO-DIALLING (RAPID DIALLING AND GROUP DIALLING)" on page 16, the procedure for using programs is
explained "PROGRAMMING FREQUENTLY USED OPERATIONS" on page 41, and the procedure for using relay
groups is explained in "SENDING FAXES USING THE RELAY REQUEST FUNCTION" on page 49.)
A combined total of 500 rapid keys and group keys can be stored. Eight programs and ten relay groups can also be
stored. If you attempt to store more than these, a warning message will appear. In this case, delete any auto-dial
keys, programs, or relay groups that are no longer needed (rapid keys: page 71, group keys: page 73, programs:
page 75, relay groups: page 78), and then store the new auto-dial key, program, or relay group.
To cancel a storing, editing, or deleting procedure, press the [CLEAR ALL] key (
Note
condition settings screen.
To store, edit, or delete an auto-dial key, program, or group, first follow steps 1 through 4 below.
1
Press the [CUSTOM SETTINGS] key.
LINE
DATA
CUSTOM SETTINGS
B STATUS
66
2
Touch the [ADDRESS CONTROL] key.
ADDRESS
RE
CONTROL
KEY OPERATOR PRO
). You will return to the