Troubleshooting
Problems Concerning Network Functions
Cannot connect using EasyMP Network Projection
Check the message on the screen and then apply the following countermeasures.
Error Messages
The application version used is not supported. Install the
latest version of the application on your computer.
When a connection is made using EasyMP Network Projection, the projected image remains as is, and a connection cannot
be made from another computer.
Check
Did the presenter leave the conference room without
cutting off the network connection?
The projector is not found when EasyMP Network Projection is started.
Check
Is the optional Wireless 802.11a/b/g Module connected?
For Wireless LAN
Install the current version of EasyMP Network Projection from the EPSON Projector Software for
Meeting & Monitoring CD-ROM supplied with the projector.
With EasyMP Network Projection, the connection with the computer that was previously connected
can be cut off when another computer tries to connect with the projector, and it connects with the
computer that is trying to connect.
Therefore, when a Projector keyword is not set for the projector, or if you know the Projector keyword,
you can cut off the current connection and, if you perform a connection operation, you can connect
to the projector.
When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart
the projector and reconnect.
Check that the optional Wireless 802.11a/b/g Module is securely connected.
Remedy
Remedy
Remedy
56