Problems Concerning Network Functions; Cannot Connect Using Easymp Network Projection; When Connected Using Easymp Network Projection, A Connection Cannot Be Made From Another Computer; The Projector Is Not Found When Easymp Network Projection - Epson PowerLite 1830 Operation Manual

Network and pc free operation guide
Hide thumbs Also See for PowerLite 1830:
Table of Contents

Advertisement

Troubleshooting

Problems Concerning Network Functions

Cannot connect using EasyMP Network Projection

Check the message on the screen and then apply the following countermeasures.
Error Messages
The application version used is not supported. Install the
latest version of the application on your computer.

When connected using EasyMP Network Projection, a connection cannot be made from another computer.

Check
Did the presenter leave the conference room without
cutting off the network connection?
The projector is not found when EasyMP Network Projection is started.
Check
Is the Network Configuration screen from the
Configuration menu displayed on the projector?
Are the computer's LAN card and the built-in LAN function
available?
Install the current version of EasyMP Network Projection from the EPSON Projector Software for
Meeting & Monitoring CD-ROM supplied with the projector.
With EasyMP Network Projection, the connection with the computer that was previously connected
can be cut off when another computer tries to connect with the projector, and it connects with the
computer that is trying to connect.
Therefore, when a Projector keyword is not set for the projector, or if you know the Projector keyword,
you can cut off the current connection and, if you perform a connection operation, you can connect
to the projector.
When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart
the projector and reconnect.
When the Network Configuration screen is displayed on the projector, network connection for
EasyMP Network Projection is disabled. Close network settings on the projector, and return to the
LAN standby screen.
Check that LAN is valid by checking Control Panel - System - Hardware in the device manager and so
on.
Remedy
Remedy
Remedy
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

V11h341020 - powerlite 1830 multimedia projector

Table of Contents