Problems Concerning Network Functions; Cannot Connect Using Emp Ns Connection; When A Connection Is Made Using Emp Ns Connection, The Projected; Computer - Epson PowerLite 825 Operation Manual

Troubleshooting

Problems concerning network functions

Cannot connect using EMP NS Connection

Check the message on the screen and then apply the following
countermeasures.
Error Messages
The application version used is not supported. Install the
latest version of the application on your computer.
When a connection is made using EMP NS Connection, the
projected image remains as is, and a connection cannot be
made from another computer.
Check
Did the presenter leave the conference room without
cutting off the network connection?
You are using an old version of EMP NS Connection. A connection cannot be made. Install the current
version from the EPSON Projector Software for Meeting & Monitoring CD-ROM supplied with the
projector.
With EMP NS Connection, the connection with the computer that was previously connected can be
cut off when another computer tries to connect with the projector, and it connects with the computer
that is trying to connect.
Therefore, when a Projector keyword is not set for the projector, or if you know the Projector keyword,
you can cut off the current connection and, if you perform a connection operation, you can connect
to the projector.
When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart
the projector and reconnect.
Remedy
Remedy
59