Cannot Connect In Advanced Connection Mode Or Wired Lan Connection; The Slide Show Cannot Be Displayed On The Desired Display When The Multi-Screen Display Function Is Being Executed; Applications Are No Longer Displayed From The Computer Screen When The Multi-Screen Display Function Is Executed - Epson PowerLite Pro Z8050WNL Network Operation Manual

Troubleshooting

Cannot connect in Advanced Connection Mode or Wired LAN connection

Check
Are the SSID settings for the computer, access point, and
projector different?
Are the WEP keys set properly?
Are the connection denial functions, such as MAC
g
Address restrictions and port restrictions, set correctly at
the access point?
Are the IP address, the Subnet Mask, and the Gateway
Address for the access point and the projector set
correctly?
Are the access point and the projector's subnet different? Select Manual search from EasyMP Network Projection, specify the IP address, and connect.

The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed.

Check
Are you using PowerPoint 2002 or an earlier version?
For Windows

Applications are no longer displayed from the computer screen when the multi-screen display function is executed.

Check
Is another application running on the virtual display
For Windows
Set the computer, the access point, and the projector to the same SSID. See your User's Guide for more
information.
When selecting WEP from Security, set the access point, the computer, and the projector to the same
WEP key. See your User's Guide for more information.
Set the projector to allow connections from the access point.
When not using a DHCP, adjust each setting. See your User's Guide for more information.
p.36
s
To set and use two or more virtual displays
virtual displays to one before displaying the Slide Show.
g
? When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In
this case, set EPSON Virtual Display to "Off" in "Screen properties".
Remedy
Remedy
g , use PowerPoint 2003 or later, or limit the number of
Remedy
58