Timer Setting; Display Of Outdoor Temperature - Sharp GX-X18JR Installation And Operation Manual

TIMER setting

Display of outdoor temperature

GREE_cassette_eng.indd 7
• When the unit is not operating, timer start can be set.
When the unit is operating, timer shutoff can be set.
The range of timer setting is between 0.5 to 24 hours.
 Press the TIMER button.
The word "TIMER" will flash on the display.
2 Press the buttons ( ) or ( ) to increase or decrease
the set time.
3 Press the TIMER button again. The timer will go into
effect. The unit will start to count the time passed.
To cancel the timer setting, press the TIMER button.
NOTE:
When the protection or malfunction happens after the
timer on was set up, the time place will display the
protection or the error codes, the timer button cannot
be set up, but the time you have set up before is still
available.
Under normal condition, The "ENV" and the room
temperature are displayed.
Press "SWING" button for 5 seconds.
The "OUT ENV" will be displayed.
• The outdoor temperature will show in the display for 0
seconds, and then return to the room temperature.
E-7
08.10.28 11:42:41 AM