Care And Maintenance - Sharp GX-X18JR Installation And Operation Manual

CARE AND MAINTENANCE

Warning
• Be sure to disconnect the power cord from the wall outlet or turn off the circuitbreaker before
performing any maintenance.
How to clean the air filter
1
Open the suction grille
Unscrew the two screws.
Slide both knobs simultaneously as shown
and pull them downward slowly.
2
Remove the air filter
Slide knobs on the back of the suction grille
outward and remove the air filter.
Then remove three air cleaners on it.
3
Clean the air filter
Use a vacuum cleaner to remove dust. If the
filter is dirty, wash it with warm water and a
mild detergent. Dry filter in the shade before
reinstalling.
• Do not clean with hot water.
• Do not dry over fire.
• The suction grille must be opened by
skilled personnel.
4
Fix the air filters
• Fix three air cleaner on the air filter and
then fix the air filter to the suction grille by
hanging it to the projected portion above
suction grille.
• Set air filter by sliding the knob on the back
of the suction grille inward.
5
Close the suction grille. (Refer to step 1.)
GREE_cassette_eng.indd 17
Screws
E-7
08.10.28 11:42:44 AM